Environment

Perfect water supply - for wet cutting

Our wet cutting system makes dust control easier. A progressive valve with distinct end positions allows you to adjust the water volume exactly as required, which greatly reduces water consumption and slurry. If possible, use enough water while wet cutting to bind the dust directly at the source.

Automatic, powerful water flow

The Husqvarna WT 15 is a compact, easy-to-use 15 litre water tank with electric pump. The tank is battery-powered and provides a powerful flow of water for approximately 45 minutes, without you having to pump manually.

Portable, powerful dust collection

If using water is not an option on the site, the cutting equipment should be used with an integrated dust collection device that captures dust directly at the source. This device should be connected to a dust extractor with the appropriate airflow and capacity for the application, and be equipped with HEPA H13 filters. When cleaning the work area, use a scraper instead of a broom to clean the floor. Always use a dust extractor equipped with HEPA H13 filters when vacuum-cleaning.

Attachable, effective dust collection

The Vac attachment for the K 4000 models gives you unbeatable dust collection and allows cutting without water. The vacuum unit is easy to install and remove thanks to its quick connection.

7.3 X-Torq® engine technology

More power, less fuel and emissions

X-Torq® is our patented technology for powerful, fuel-efficient engines with impressively low exhaust emissions. These light and durable engines require a minimum of maintenance and service.

X-Torq® gives up to 20 % lower fuel consumption and up to 75 % lower exhaust emissions. At the same time, the engine delivers extra torque over a wider rpm range, providing raw power and rapid acceleration. All compared to conventional engines.

Thank you for your message!

Go to section